Operating Your Humidifier - Vicks VEV400 Serie Manual De Uso Y Cuidado

Prepare Wicking Filter
Step 1
1.
Remove Tank.
2.
Run Wicking Filter under cool water until saturated. DO NOT wring filter.
3.
Fold filter flat. Insert wet filter into Removable Tray. Place Removable Tray back in humidifier.
DO NOT squeeze out excess water.
Filling/Refilling Water Tank
Step 1
1.
Remove Water Tank by grasping Handle and pulling up. Remove Tank Cap by turning counter
clockwise (to left).
2.
Fill the Water Tank with cool tap water. DO NOT use warm or hot water. DO NOT ADD
ESSENTIAL OILS, MEDICATIONS, OR INHALANT LIQUIDS such as Vicks VapoSteam or
Kaz Inhalant to the Water Tank. Doing so could cause damage to the humidifier and void
the warranty.
3.
Replace Tank Cap and secure tightly by turning clockwise (to right).
4.
Carry full Water Tank back to humidifier using two hands; one hand on handle at the top of
the Tank and other hand supporting the bottom of the Tank. Take care not to push the plunger
on the bottom of the Water Tank or leaking may occur. DO NOT carry the Tank by the Water
Release Valve.
5.
Place the Water Tank on the humidifier Base. Some water will empty into the Removable Tray.
Note: Once the filled Water Tank has been placed on the unit DO NOT move humidifier. Doing so
could cause leakage and spills.

Operating Your Humidifier

Step 1
1.
With Power Knob in the OFF position, plug humidifier into a polarized 120V outlet.
CAUTION: To avoid electric shock, DO NOT plug humidifier into outlet with wet hands.
Step 2
Step 2 Step 3
Step 2
Step 3
$
Step 4
Step 3
(Continued)
Step 5
$
5