Removal - Storage - Scrapping; Inconveniences, Causes And Solutions - Noaw TS8 Manual De Uso Y Mantenimiento

Cleaning and Maintenance
4-5 Check of safety devices
Machine safety is the direct consequence of the efficiency of safety devices used.
Every day, before starting work, check for proper operation of the stop device.
Every day, before starting work, check for proper operation and effectiveness of all protections.
Any faults identified during checks should be immediately reported to the supervisor, who shall put the machine out of
order and, if appropriate, call the manufacturer's service department.
4-6 Removal – storage – scrapping
To remove the machine, disconnect it from power supply.
In case of long machine downtime, disconnect it from power supply, and clean it thoroughly as indicated for routine
cleaning operations.
Do not store the machine in humid places, and protect it against any adverse weather conditions.
The machine is manufactured with non-toxic and non-harmful materials; this equipment may not be treated as
household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and
electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling
of this product. For more detailed information about recycling of this product, please contact your local city office, your
household waste disposal or the dealer where you purchased this product.
4-7 Emergency conditions
In the case of flooding of the room where the machine is located, immediately disconnect power supply.
Before restarting the machine, let the machine be checked by a specialized operator.
In case of fire in the work place, immediately disconnect machine power supply and use appropriate fire extinguishers,
directing the jets to the flame base. Even if the machine has no apparent damage, let it be checked by a specialized
technician before restarting it.
The working area around the machine should be free from any foreign materials to ensure operators can leave the area
quickly in case of danger.
Remember that this machine cannot operate in explosive environments.
4-8

Inconveniences, causes and solutions

Inconvenience
The machine motor does not
start
13
Cause
Plug not connected with power supply socket
Fuses on power supply socket are blown
The electronic card is damaged
Condenser exhausted
Power supply or motor cables disconnected
from the electronic card
Meat Mincer
Solution
Connect it
Replace socket fuses
Replace the card
Replace the condenser
Connect cables