Tabla de contenido
Idiomas disponibles
Idiomas disponibles
17.2 Maintenance
Handling the machine with the power supply up can lead to serious injuries or even
death. Always disconnect the machine from the power supply before servicing or
maintenance work and secure it against unintentional or unauthorised reconnection!
The machine is low-maintenance and only a few parts have to be serviced. Nevertheless,
malfunctions or defects which could impair the safety of the user must be rectified immediately!
Before each operation, check that the safety devices are in perfect condition.
Check the connections for tightness at least once a week.
Regularly check that the warning and safety labels on the machine are in perfect and
legible condition.
17.2.1
Maintenance schedule
The type and degree of machine wear depend on the operating conditions. The following intervals
apply when the machine is used within the specified limits:
interval
Before usage
machine
Before usage
machine
1 x month
Moving parts
1x month
break
17.2.2
Saw blade exchange
Before any manual tool change, stop the spindles, wait for standstill of all tools and
prevent an unintentional restart = unplug the power supply.
During tool change, please use cut protection gloves to avoid risk of injury.
Assembly /Disassembly of saw blade
HOLZMANN MASCHINEN GmbH
WARNING
components
CAUTION
CAUTION
www.holzmann-maschinen.at
CLEANING, MAINTENANCE, STORGE, DISPOSAL
activity
Cleaning the machine
Removal of all loose parts / tools
Greasing / lubrication of guides / gear racks /
wheels
Function test to determine that the spindles have
stopped within the specified time (<10s)
Loosen the two screw M8 (S) on the saw blade
cover (1).
• Swivel off the saw blade cover.
• Loosen the clamping nut (M20, left-hand
thread)
•Remove the saw blade and install a new one.
NOTE: Only use well sharpened, crack-free and
not deformed saw blades.
Tighten clamping nut, with holding wrench.
ATTENTION: Check riving knife adjustment
34
TKS500S
Tabla de contenido
