Transport; Assembly; Checking Scope Of Supply; The Workplace - HOLZMANN MASCHINEN TKS500S Instrucciones De Servicio

A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Irrespective of all safety regulations, their sound common sense and corresponding technical
suitability/training are and remain the most important safety factor in the error-free operation of
the machine. Safe working depends first and foremost on you!
13

TRANSPORT

Damaged or insufficiently strong hoists and load slings can result in serious injury or
even death. Always check hoists and load slings for adequate load-bearing capacity
and perfect condition, secure loads carefully and never stand under suspended loads.
To ensure proper transport, also observe the instructions and information on the transport
packaging regarding centre of gravity, attachment points, weight, means of transport to be used
and the prescribed transport position, etc..
The machine should be transported to the place of operation by means of a forklift or lift truck.
After the machine has been assembled, it can be transported for short distances with the
transport device or transported by crane or forklift truck using belts of appropriate load capacity
and length.
14

ASSEMBLY

14.1 Checking Scope of Supply

Check the machine immediately after delivery for transport damage and missing parts.

14.2 The workplace

Choose a suitable place for the machine. Pay attention to the safety requirements and the dimen-
sions of the machine. The selected location must ensure a suitable connection to the electrical
network as well as the possibility of connection to a dust collection system. Make sure that the
machine is placed on a solid and level surface and that the ground can support the load of the
machine. The machine must be levelled simultaneously at all support points. It is also necessary
to secure a distance of at least 0.8 m around the machine. In front of and behind the machine,
the necessary distance must be provided for the feeding of long workpieces.

14.3 Assembling the machine

The machine has been disassembled for transport and must be assembled before use. Follow the
instructions below:
Handling the machine with the mains supply intact can result in serious injury or
death. Therefore, do not connect the machine to the power supply before completing
the assembly.
HOLZMANN MASCHINEN GmbH
NOTICE
WARNING
WARNING
www.holzmann-maschinen.at
TRANSPORT
27
TKS500S