Beurer BM 70 Instrucciones Para El Uso página 20

Key to symbols Important! Read the operating instruction!
Application part Type BF
These specification are subject to change without notice for
purpose of improvement.
10. Adapter
Model No. FW 7333SM/12
Input 100 – 240 V, 50 – 60 Hz
Output 12 V DC, 700 mA, only in connection with
beurer blood pressure monitor.
Supplier Friwo Gerätebau GmbH
Protection This device is double insulated and pro-
tected against short circuit and overload by
a primary thermal fuse.
The green LED lights under normal
conditions.
Make sure to take the batteries out of the
compartment before using the adapter.
Double insulated /
equipment class 2
Enclosures and Equipment enclosed to protect against
Protective Covers contact with live parts, and with parts
which can become live (finger, pin, hook
test).
The operator shall not contact the patient
and the output plug of AC adaptor simulta
neously.
All manuals and user guides at all-guides.com
• This unit is in line with European Standard EN60601-1-2 and
• The instrument is in line with the EU Medical Products Di-
• If you are using the instrument for commercial or economic
20
is subject to particular precautions with regard to electro-
magnetic compatibility (EMC). Please note that portable and
mobile HF communication systems may interfere with this in-
strument. For more details, please contact customer service
at the address indicated.
rective 93/42/EC, the German medical products act and
European standards EN1060-1 (non-invasive blood pressure
monitors, Part 1: general requirements) and EN1060-3 (non-
invasive blood pressure monitors, Part 3: Supplementary
Requirements for Electromechanical Blood Pressure Meas-
urement Systems).
purposes, you must check measurement precision regularly
in accordance with the 'Operators' Ordinance on Medical
Products'. Even in the case of private use, we recommend
checking measurement precision every two years at the
manufacturers.