9.3. Switch LED light strip on/off
There is an LED light strip on the underside of the radio.
Press the
button to switch the light strip on or off.
The LED light strip switches off automatically after a period of 120
minutes.
This light is only designed for selective, supporting lighting for the
presentation of foodstuffs and is not intended to be room lighting.
9.4. Setting the volume/muting the device
Use the controller or the VOL+ / VOL buttons on the remote control to set the
desired volume.
In radio or AUX mode, press the controller or the
remote control to mute the radio.
MUTE is shown on the display for as long as the device is
Press the controller or the
unmute.
9.5. Equaliser
The radio has pre-installed equaliser settings (NORMAL, FLAT, ROCK, POP,
JAZZ, CLASSIC, BASS). It is possible to select an equaliser setting in any
operating mode.
Press and hold the AOT/EQ button or press the EQ button on the remote
control to open the equaliser settings menu.
Turn the controller or press the EQ button on the remote control several times
to select an equaliser setting.
Your equaliser setting is automatically applied to all operating modes. The radio
closes the equaliser setting menu after a few seconds and returns to the previous
display.
9.6. Radio mode
Fully unwind the connected wire antenna for radio reception.
Switch the device on.
When you switch the radio on, it starts in the last operating mode used.
If necessary, press the FUNC/USER button or the FUNC button on the
remote control several times to switch to radio mode.
To switch from stereo to mono playback during radio operation, press the
MO/ST button.
muted.
button on the remote control again to
button on the
61
DE
EN
FR
NL
IT
ES