Removal Of Wire Rope - Beta Max Beta Lite Manual Del Usuario

B e t a M a x P o r t a b l e H o i s t s O p e r a t i n g a n d M a i n t e n a n c e P r o c e d u r e s M a n u a l
M a i n t e n a n c e a n d C a r e
6.2

Removal of Wire Rope

Before attempting wire rope removal, ensure the hoist is mounted securely in
position, level, and the power is disconnected.
WARNING
Keep fingers and hands away from drum when hoist is operating.
CAUTION
Always wear heavy gloves when handling the wire rope to prevent possible hand injury.
1. Remove the headache ball (weight), thimble, and hooks from the wire rope.
2. Connect hoist to the correct power source.
3. Press the DOWN control pendant push button until the rope is completely
unspooled from the drum.
4. Locate the cavity in the front of the drum.
5. Pull the rope sleeve end out of the drum about 6 inches (15 cm).
6. Cut the wire rope and remove the sleeve.
7. Remove the wire rope from the drum.
6-4
www.betamaxhoist.com
1-800-233-5112