Beta Max Beta Lite Manual Del Usuario página 69

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

NOTE:
The rolling Trolley Top and the Fixed Trolley Top can be used on steel
I-Beams ranging in size from 4 inches to 10 inches (10.2 cm to 25.4 cm) and with
flange sizes from 2.66 inches to 4.66 inches (6.75 cm to 11.83 cm).
I-Beam Suspension Brackets
Beta Max, Inc. also offers I-Beam suspension brackets that provide a way to hang
a section of I-Beam directly below the horizontal ledger of a 6-foot (1.8-meter)
walk-through scaffold frame (similar to the Scaff-Trac Mounting System).
The optional I-Beam suspension brackets are designed to attach to the top of a
steel I-Beam and pull it up tight against the underside of the scaffold frame
horizontal ledger. The spacing between the top and bottom horizontal ledger on 6-
foot (1.8-meter) walk-through frames varies from one brand of scaffold to
another. The amount of space or gap between the top of the I-Beam and the lower
horizontal ledger of the scaffold frame should be as little as possible. The saddles
and mounting brackets are designed with multiple holes to allow mounting to
various scaffold frames. These holes allow for minimum top to bottom ledger
distance of 5/8 inch (1.6 cm), an intermediate distance of 6 inches (15.2 cm), and
maximum distance of 6-1/4 inches (3.8 cm).
www.betamaxhoist.com
1-800-233-5112
5-11

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Scorpio plusScorpio plus xlGemini plusNew yorkerLeoLeo xxl

Tabla de contenido