Mounting Tops - Beta Max Beta Lite Manual Del Usuario

B e t a M a x P o r t a b l e H o i s t s O p e r a t i n g a n d M a i n t e n a n c e P r o c e d u r e s M a n u a l
C o m p o n e n t s

Mounting Tops

Mounting tops bolt to the top of the hoist shroud and support the hoist. Two styles
allow the hoist to be rolled back and forth. The three available mounting top styles
are: Fixed I-Beam Top, Rolling I-Beam Trolley Top, and Roller Top. The Fixed I-
Beam mounting top is simply bolted to the I-Beam and keeps the hoist in a set
position. The Rolling I-Beam Trolley Top mounts to an existing I-Beam and has
rollers to allow free movement of the hoist along the I-Beam being used. The
Roller Top is designed to roll along channel iron, either on top of a single piece of
channel iron or between two pieces of channel iron.
NOTE: Rolling I-Beam Trolley Top and Roller Top come supplied with a hoist stop
pin and keeper for installation. The stop pin prevents the hoist from rolling off the end of
the I-Beam or channel iron.
3-10
Figure 3.4
Fixed I-Beam Top
Figure 3.5
Rolling I-Beam Trolley Top
www.betamaxhoist.com
1-800-233-5112