TRAPEZA 7NU0408DG52 Manual Uso Y Mantenimiento página 24

GB - 24
7.3.2. AUTOMATIC + 3ºC SOFT OR HARD BLAST CHILL CYCLE AND -18ºC SOFT OR HARD SHOCK
FREEZING WITH PIN PROBE
BLAST CHILL/SHOCK FREEZE PHASE
Press the
hard cycle.
Press the
hard cycle.
Press the
DISPLAY 1 the pin probe temperature.
DISPLAY 2 indicates the cabinet temperature. (Fig.4).
(Fig.4)
The following symbols light up: pin probe
and
To start the selected cycle press the
If the core temperature has not been reached within the time determined, the time out alarm is activated.
(Fig.5)
The blast chill phase continues but the
memorised in the HACCP archives. The code AL5 fl ashes on DISPLAY 1 (Fig.6).
The alarm is automatically cancelled when passing to the conservation phase and the symbol remains
on
HACCP HACCP
(Fig.6)
By pressing the
blast chilling is indicated.
Press for extended time, if present the multi-point, the multi-point button
succession the temperature of the 4 sensors on DISPLAY 2 and the corresponding number of the
sensor on DISPLAY 3. The undetected inserted sensor is displayed in DISPLAY 3 with the symbol
At the end of the cycle the machine moves into conservation phase automatically, see ch. 7.3.5.
Once the cycle is activated, By pressing the
beginning of the cycle.
+3 SOFT
-18 SOFT
, button to select the +3ºC soft blast chill cycle and the
, button to select the -18°C soft blast chill cycle and the
botton.
, temperature and
.
, at any time during the cycle in progress, the time from the start of
, type of blast chill either
.
, button and the blast chill symbo
and HACCP and HACCP symbols fl ash and the alarm is
it is possible to visualize the elapsed time from the
button for the +3ºC
button for the -18ºC
and or
lights up (Fig.5).
to display in
+3 HARD
-18 HARD
.