TRAPEZA 7NU0408DG52 Manual Uso Y Mantenimiento página 23

7.3.1. +3ºC SOFT OR HARD BLAST CHILL CYCLE AND -18ºC SOFT OR HARD SHOCK FREEZING
WITH TIMER
HARD BLAST/SHOCK FREEZE PHASE
Press the
+3ºC hard cycle.
Press the
-18ºC hard cycle.
DISPLAY 1: indicates the total time foreseen for blast chilling/shock freezing (Fig.2).
DISPLAY 2: indicates the cabinet temperature.
The following symbols light up: time
(Fig.2)
freezing soft
By pressing the
N.B.: It is possible to set a duration either shorter or longer that 90 min. for blast chill cycles or 240
min. for shock freeze cycles.
Maximum limit: 120 min. for a +3°C cycle.
Press the
By pressing button
inserted into the product, it will show the temperature of this product). At termination of the blast
chill/shock freeze cycle the machine automatically progresses to conservation.
(Fig.3)
At the end of the cycle the machine moves into conservation phase automatically,
Once the cycle is activated, By pressing the
beginning of the cycle.
button to select the +3ºC soft blast chill cycle and the
button to select the -18ºC soft blast chill cycle and the
or hard
to change the cycle duration.
or
button to start the cycle.
(Fig.3) the temperature read by the pin probe is temporarily displayed (if
+3 SOFT
-18 SOFT
, type of blast chilling soft
temperature and
Maximum limit: 300 min. for a -18°C cycle.
it is possible to visualize the elapsed time from the
button for the
button for the
or hard
.
see ch. 7.3.6.
+3 HARD
-18 HARD
23 - GB
shock