Kyocera KM-6230 Manual De Instrucciones página 37

2 2 Setting for the page separation and border erase modes 2 2
2
1
Touch the "Added" key.
2
Touch the "2 pages" key if you want to use the page
separation mode and the "One page Erase" key if you want
to use the border erase mode. Refer to the Instruction
Manual for your copier for details on setting these modes.
3 3 Setting for custom size paper 3 3 3
1
Touch the "Custom size" key.
2
Set the width of the custom paper size by touching the
upper "+" or "-" key. The paper width can be set to any 1/8"
increment between 2" and 11 5/8".
3
Set the length of the custom paper size by touching the
lower "+" or "-" key. The paper length can be set to any 1/8"
increment between 2" and 17".
4
Touch the "End" key.
All manuals and user guides at all-guides.com
Section 3 Using the Scanner
4 4 4 4 Setting for the original size
4
If you want to set the original size manually or when you
1
only want a certain area of the original scanned, touch the
"Original" key.
2
Select the size/area of the original to be scanned.
5 5 5 5 5 Setting for the "Tx. size"
* The "Tx. size" refers to the page size of the scanned image data.
For example, if the size of the original is 5 1/2" x 8 1/2" and you set
the "Tx. size" to 11" x 8 1/2", the scanned image will be enlarged by
129%. In this case, the file size (data volume) will be approximately
2 times that of a 5 1/2" x 8 1/2" image file.
1
If you want to change the "Tx. size", touch the "Tx. size" key.
2
Select the desired page size for the scanned image data.
6 6 6 Selecting the original type 6 6
Select from among the following 4 original types to correspond to the
originals that are actually being scanned:
OCR: For an original that is meant to be read with OCR
software
Text: For an original that is mostly text
Photo: For an original that is mostly a photograph or contains
mostly halftones
Mixed: For an original that is a mixture of photographs and text
3-10