Section 1 Preparation (Printer/Scanner); Names Of Parts; Main Body; Operation Panel - Kyocera KM-6230 Manual De Instrucciones

Section 1 Preparation (Printer/Scanner)

1-1 Names of Parts

Main Body

1 Parallel interface connector
Connect a bi-directional parallel cable here
when you will use the copier as a local
printer.
2 Ethernet cable connector A
Connect a 10Base-T or 100Base-TX cable
here when you will use the copier as a
network printer.
3 Ethernet cable connector B
Connect a 10Base-T or 100Base-TX cable
here when you will use the copier as a
network scanner.
4 Main switch
Turn this switch ON ( | ) first, prior to using the printer or scanner.

5 Operation panel

Use when performing settings, etc., at the copier/printer/scanner
itself.
Operation Panel
6 Touch panel
Displays the various operation menus, etc., as well as indicating
the status of the machine. Set-up and configuration is accom-
plished by lightly touching the corresponding area on the panel.
* DO NOT press on the panel with pointed objects or wooden,
metal or other hard objects. All keys, tabs and indications shown
on the touch panel will be referred to throughout this handbook
in quotation marks.
7 Data/Error indicator
Blinks or lights during communication with a computer. Blinks or
lights red when an error has occurred during communication.
8 Copier/Printer/Scanner key
Press this key to switch between copy, printer and scanning
operation.
1-1
All manuals and user guides at all-guides.com
9 Start key
Set the desired original and press this key to start the scanning
operation.
0 Numeric keys
Press these keys when you want to enter a desired value for one
of the various settings.
! Reset key
Press this key when you want to reset a value that was entered
for one of the various settings.
@ Brightness adjustment control dial
Turn this dial when you want to adjust the brightness of the touch
panel.