Paper; Paper Acceptable For The Drawer; Paper Acceptable For The Stack Bypass Tray - Kyocera KM-6230 Manual De Instrucciones

Section 2 Using the Printer

2-3 Paper

(1) Paper acceptable for the drawer

• Plain paper (64 g/m 2 ): 500 sheets
2
• Recycled paper (64 g/m ): 500 sheets
• Color paper (64 g/m 2 ): 500 sheets
* Acceptable weight: 64 g/m 2 - 80 g/m
* Acceptable sizes: 11" x 17", 8 1/2" x 14", 11" x 8 1/2"
* For information regarding setting paper, refer to the Instruction
Handbook for your copier.

(2) Paper acceptable for the stack bypass tray

2
• Plain paper (64 g/m ): 100 sheets
• Recycled paper (64 g/m 2 ): 100 sheets
• OHP transparencies: 25 sheets
• Postcard: 25 sheets
• Envelopes (COM-10, Monarch): 10 sheets
2
* Acceptable weight: 45 g/m - 200 g/m
* Acceptable sizes: 11" x 17", 8 1/2" x 14", 11" x 8 1/2"
It is additionally possible to set custom size paper other than those
sizes noted above as long as the dimensions of that paper are within:
Width: 3 7/8" - 11 5/8", Length: 5 3/4" - 17"
* When using OHP transparencies, flip through them to separate the
sheets before setting them into the stack bypass tray.
* For information regarding setting paper, refer to the Instruction
Handbook for your copier.
2-5
All manuals and user guides at all-guides.com
2
2
Setting envelopes in the stack bypass tray
Carry out the following procedure when setting envelopes in the
stack bypass tray. Be sure also to enter into the printer's operation
panel the size of the envelope as it corresponds to the envelope
type. (Refer to the sizes at right and carry out the following procedure
to enter the appropriate size in the operation panel of the printer.)
Envelope Type Size That Should Be Entered
COM-10 9 1/2" x 4 1/8"
Monarch 7 1/2" x 3 7/8"
1 Open the stack bypass tray.
2
Adjust the insert guides to match the size of the envelope.