Operation; Issuing Printing Commands - Kyocera KM-6230 Manual De Instrucciones

Section 2 Using the Printer

2-4 Operation

(1) Issuing printing commands

Carry out the following procedure in order to issue printing
commands from your computer and print out with this unit.
1
Turn the main switch ON ( | ).
* The basic copier screen will appear on the touch panel
and, once warm up is complete, "Ready to copy." will
appear in the message display.
2
Press the Copier/Printer/Scanner switching key to switch to
the screen for printer operation.
* If printing commands are issued from your computer
immediately after a copy job is completed in this unit, the
print job may not be started right away. This is because
the copying settings must be cleared in this unit before
printing can begin. Once the Auto Clear function engages
and copy settings are cleared, printing will begin. To
initiate printing immediately, press the Copier/Printer/
Scanner switching key to change to the screen for printer
operation.
2-7
All manuals and user guides at all-guides.com
3
Press the "To on line" key and "Ready to print." will appear in
the message display. This will signify that the printer is on-
line.
* It is not necessary to press the "To on line" key if "Ready
to print." is already displayed.
In your computer, start up the software application to be
4
used.
* Carry out the printing procedure appropriate to the
software application in use. For more detailed information,
refer to the Instruction Manual for the software application
in use.
* DO NOT return to the screen for copier operation and
press the Stop/Clear key during printing. If you do, printing
will be canceled.