Printing When The Management Function Is On - Kyocera KM-6230 Manual De Instrucciones

(5) Printing when the management function is on

If the printer management function has been set to be effective on
the printer, make the following settings on the PC and print them.
* For details of how to set the printer management function on the
printer, refer to the printer's operation manual.
1 After the driver is installed, click the driver icon with the right
button of the mouse, to display the properties screen.
2
In the properties screen, click the JOB tab, set the
management code to ON, then enter the specified
management code. Printing will be enabled, and the number
of copies will be added to those for each department. For
details, refer to the operation manual of the printer and
online manual.
* The above procedure varies slightly with the type of driver
installed.
* The management code is a secret number provided to
enable certain settings assigned to the corresponding
department. This is not a network management secret
number.
If you are using a driver other than the PCL driver, the management
ID code must be selected from a range of 0000 to 0030 or 0000000
to 0000030. Management setting cannot be made with any other ID
code.
Make sure that the management ID code set on the printer is also
within this range.
* The screen shown on the right is for the printer driver for
Windows NT.
All manuals and user guides at all-guides.com
Section 2 Using the Printer
Restriction on the manegement ID code
* Even if an attempt is made to send data directly using a DOS
command (e.g. COPY command), i.e. not via the printer driver, it
will not be output.
2-14