Description - Hilti DAG 500-D Manual De Instrucciones

Obligation signs
en Wear eye Wear a hard
protection
Wear
breathing
protection
Symbols
Read the Return waste
operating material for
instructions recycling.
before use
Alternating Revolutions
current per minute
Diameter Double
insulated

2 Description

2.1 Use of the product as directed
The power tool is designed for cutting, grinding and brushing metal and mineral materials without use of water. Use
of a guide carriage is mandatory for cutting stone.
The working environment may be as follows: construction site, workshop, renovation, conversion or new construction.
The power tool may be operated only when connected to a power supply providing a voltage and frequency in
compliance with the information given on its type identification plate.
Working with metals: Cutting, grinding, brushing.
Working with mineral materials: Cutting and slitting using the corresponding guard (DC-EX), grinding using the
corresponding guard (DG-EX).
Use only discs (abrasive grinding discs, abrasive cutting discs, etc.) that are approved for use at a speed of at least
11000/min, with a maximum thickness of ¼" (grinding discs) or ¹⁄₈" (cutting discs) and a diameter of max. 5 ".
Use only synthetic resin-bonded, fiber-reinforced grinding discs or cutting discs approved for use at a permissible
peripheral speed of at least 80 m/sec.
The power tool may be used only for dry cutting or grinding.
When grinding stone, a vacuum cleaner equipped with a stone dust filter, e.g. a suitable Hilti vacuum cleaner, must be
used.
Working on materials hazardous to the health (e.g. asbestos) is not permissible.
2
Wear ear
hat protection
Volts
Revolutions
per minute
Location of identification data on the power tool
The type designation, item number, year of manufacture
and technical status can be found on the type identifi-
cation plate on the machine or tool. The serial no. can
be found on the underside of the motor housing. Make
a note of this data in your operating instructions and
Wear
always refer to it when making an enquiry to your Hilti
protective
representative or service department.
gloves
Type:
Serial no.:
Amps
Rated speed