Disposal; Manufacturer's Warranty - Tools - Hilti DD 130 Manual De Instrucciones

11. Disposal

Most of the materials from which Hilti power tools are manufactured can be recycled. The materials must be cor-
rectly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking
back your old electric tools for recycling. Please ask your Hilti customer service department or Hilti sales repre-
sentative for further information.
Should you wish to return the electric tool yourself to a disposal facility for recycling, proceed as follows: Dismantle
the tool as far as possible without the need for special tools. Use absorbent paper to wipe oily parts clean and col-
lect any oil that runs out. This paper should also be disposed of correctly. On no account should oil be allowed
to enter the waste water system or find its way into the ground.
Separate the individual parts as follows:
Part / assembly Main material
Transport box Plastic*
Motor housing Plastic* / synthetic rubber
Grip, side handle Plastic*
Drill stand, complete Steel / aluminium / magnesium alloy / plastic*
Motor (rotor / stator) Steel / copper
Gearing parts Steel
Screws, small parts Steel
Supply cord Copper / synthetic rubber
Drilling slurry
** Plastic parts carry a mark indicating the material from which they are made.
** With regard to environmental aspects, allowing drilling slurry to flow directly into rivers, lakes or the sewerage
system without suitable pre-treatment is problematical. Ask the local authorities for information about applic-
able regulations.
We recommend the following pre-treatment:
G Collect the drilling slurry (e.g. use an industrial vacuum cleaner).
G Allow the slurry to settle and dispose of the solid material at a construction waste disposal site (the addition of
a flocculent may accelerate the settling process).
G Water from the drilling slurry (alkaline, ph value > 7) should be neutralised by adding an acidic neutralising agent
or large quantity of water before it is allowed to flow into the sewerage system.
12. Manufacturer's warranty – tools
Hilti warrants that the tool supplied is free of defects
in material and workmanship. This warranty is valid so
long as the tool is operated and handled correctly,
cleaned and serviced properly and in accordance with
the Hilti Operating Instructions, and the technical sys-
tem is maintained. This means that only original Hilti
consumables, components and spare parts may be
used in the tool.
This warranty provides the free-of-charge repair or
replacement of defective parts only over the entire lifes-
pan of the tool. Parts requiring repair or replacement
as a result of normal wear and tear are not covered by
this warranty.
Additional claims are excluded, unless stringent
national rules prohibit such exclusion. In particular,
Printed: 08.07.2013 | Doc-Nr: PUB / 5069521 / 000 / 01
All manuals and user guides at all-guides.com
Hilti is not obligated for direct, indirect, incidental
or consequential damages, losses or expenses in
connection with, or by reason of, the use of, or inabil-
ity to use the tool for any purpose. Implied warranties
of merchantability or fitness for a particular purpose
are specifically excluded.
For repair or replacement, send tool or related parts
immediately upon discovery of the defect to the address
of the local Hilti marketing organization provided.
This constitutes Hilti's entire obligation with regard to
warranty and supersedes all prior or contemporane-
ous comments and oral or written agreements con-
cerning warranties.
Recycling
Plastics recycling
Plastics recycling
Plastics recycling
Scrap metal / plastics recycling
Scrap metal
Scrap metal
Scrap metal
Scrap metal
**
13