Troubleshooting; Error Codes - Haier HLPW028BXW Manual Del Usuario

TROUBLESHOOTING

First try the solutions suggested here to possibly avoid the cost of a service call.
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.

ERROR CODES

When the washer senses an error all machine operations will stop, a series of
4 beeps will sound and an error code will be shown in the Estimated Time remaining
display.
ERROR CODE
dO
(Washer Lid is
Open)
Ld
(Too Long to
Drain)
UL
(Unbalanced
Load)
LF
(Too Long to
Fill)
WARNING
Electrical Shock Hazard
DESCRIPTION
The washer has detected
that the lid is open.
The washer has detected
that it is taking too long to
completely drain water
from the wash tub.
The washer has detected
an out of balance load and
has failed to self-correct
the condition.
The washer is not level
from side to side, or from
front to back.
The washer senses that it
is taking too long to fill the
wash tub or does not read
a change in water level
during a fill.
POSSIBLE CAUSE AND
SOLUTION
If the lid is opened during the
wash cycle, the wash cycle will
stop. Closing the lid should
dismiss the error and resume
normal operation.
See Water in the
"Troubleshooting" section.
Call service center at
1-877-337-3639.
Open the washer lid,
redistribute the load, close the
lid, and press the Start/Pause
button to resume operation.
Level the washer, open and
close the washer lid and press
the Start/Pause button to
resume operation.
See Water in the
"Troubleshooting" section.
Check for water leakage.
Call service center at
1-877-337-3639.
31