Cycle Guide - Haier HLPW028BXW Manual Del Usuario

Ocultar thumbs Ver también para HLPW028BXW:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

There are 3 soil levels from which to choose. - Heavy, Normal, Light
WATER LEVEL BUTTON
D
Press the Water Level button to select an appropriate water level for your load.
Small is the lowest water level and Super is the highest.
DELAY START BUTTON
E
Press the Delay Start button to delay the start of your wash cycle between
1 - 24 hours in one hour increments.
The number of hours will be shown in the Estimated Time Remaining
Display. Each press of the Delay Start Button will increase the time by
1 hour.
One button press after 24 will cancel the Delay Start feature. You can also
cancel the Delay Start feature by pressing the power button to turn off the
washer.
Press the Start/Pause button to begin the countdown.
EXTRA RINSE BUTTON
F
Press to add an extra rinse to your wash cycle.
NOTE:
Some cycles have this option as a default. See the Cycle Guide for
details.
ESTIMATED TIME DISPLAY
G
The Estimated Time display shows the estimated cycle time in minutes.
When using the Delay Start feature, this display will show the hours/minutes
remaining as it counts down to the time set for the wash cycle to start.
CYCLE STATUS INDICATORS
H
The Cycle Status lights indicate the stages of the selected cycle.
START/PAUSE BUTTON
I
Press the Start/Pause button to start a selected cycle or to pause an operating
cycle.
NOTE:
After starting the wash cycle, you must pause the operating cycle
to change the Wash Temp, Soil Level and Water Level settings.
POWER BUTTON
J
Press POWER to turn on and off the washer.
IMPORTANT:
Turning off power by pressing the Power button does NOT disconnect
the washer from the power supply.
If the washer is powered on, but the Start/Pause button is not pressed
within 5 minutes, the washer will turn off automatically.

CYCLE GUIDE

IMPORTANT:
Do not wash, spin, or dry water-proof seats, mats or clothing.
Check garment label laundering instructions to select the proper washer
settings. The wrong settings could damage and discolor clothing. Certain
garments should be dry-cleaned only.
NOTE:
To protect your wash load, all options and settings are not available for
all cycles. The shaded boxes indicate the default settings for each cycle.
23
Tabla de contenido

Solución de problemas

loading

Tabla de contenido