Haier HLPW028BXW Manual Del Usuario página 14

Use two or more people to move and install washer.
Failure to do so can result in back or other injury.
1. Remove all packing materials. This includes the foam base, molded plastic
support and all adhesive tape holding the washer accessories inside and
outside.
IMPORTANT:
not operate properly and will void your warranty.
•
Open the lid to access the wash basket brace. Pull up on the basket brace to
remove.
NOTE:
Save the wash basket brace to use when moving the washer in
the future.
a
•
Using two or more people, lift the washer off of the packing base and the
molded plastic support.
NOTE:
It is possible for the plastic support, under the U bracket, to
remain attached to the bottom of the washer. Make sure it is removed
with the foam base.
2. Inspect the washer, and remove any remnants of packaging, tape or printed
materials before using the washer.
WARNING
Excessive Weight Hazard
Failure to remove the packing base will cause the washer to
Plastic Support
A
Foam Base
B
Wash Basket Brace
A
12
a
b