Control Panel And Features; Control Panel - Haier HLPW028BXW Manual Del Usuario

CONTROL PANEL AND FEATURES

CONTROL PANEL

a
WASH CYCLE BUTTON
A
Press the Wash Cycle button to select the desired cycle for your wash load.
The standard default settings of each cycle will be displayed; the default
settings can be changed by using the Setting buttons - Wash Temp, Soil Level,
and Water Level.
There are 6 wash cycles and 2 specialty cycles from which to choose:
WASH CYCLES
Heavy Duty - Use this cycle for heavily soiled, durable, colorfast garments.
Whites - Use this cycle to deep clean white garments.
Perm Press - Use this cycle for wrinkle-free clothing, cotton/poly blend fabrics,
and dress shirts and pants.
Normal - Use this cycle for normally soiled cottons and mixed garment loads.
Delicate - Use this cycle to gently wash delicate garments and lingerie with
sheer fabrics with lace trim.
Quick - Use this cycle to wash small loads of lightly soiled clothing.
SPECIALTY CYCLES
Rinse & Spin - Use this cycle to relax wrinkles, remove excess detergent, and
refresh clean garments.
Spin Only - Use this cycle to extract water from sink washed or clean wet
garments.
WASH TEMP BUTTON
B
Press the Wash Temp button to select a wash temperature; all rinses use cold
water. For best results follow your garment label instructions and use the
warmest water temperature that is safe for your fabric.
NOTE:
Not all wash water temperatures are available for all wash cycles.
SOIL LEVEL BUTTON
C
Press the Soil Level button to select the soil level that is most appropriate for
your load. Based on the soil level, the wash time will increase or decrease by
4-8 minute increments in the Estimated Time Remaining Display.
b c d
g h
e f
22
i j