Vacationing; Moving Or Storage Preparation - Haier HLPW028BXW Manual Del Usuario

Ocultar thumbs Ver también para HLPW028BXW:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

2.
Turn the filter over so the back side of the filter is facing upward.
3.
While holding the filter firmly with one hand, lift up on the bottom of the filter to
separate the front of the filter from the back, so you can access the filter
screen.
4.
Clean the filter screen and replace the back of the filter.
5.
Wipe any lint residue away from the filter housing sides with a soft cloth.
6.
Slide the filter into the wash basket and firmly press it into place.
IMPORTANT:
Both lint filters must be in place during the wash cycles. Clean
the lint screens after each wash load.
CLEANING THE WASH TUB
The washer interior should be cleaned once a month to reduce the buildup of soap
film and to help keep the wash system odor free.
1.
Make sure the washer is empty.
2.
Pour 1 cup (250 ml) of liquid chlorine bleach into the bleach dispenser.
IMPORTANT:
more than 1 cup of bleach to avoid damaging the washer.
3.
Close the washer lid.
4.
Press the Power button to turn on the washer.
5.
Press the Wash Cycle button to select Whites.
IMPORTANT:
This may damage laundry or cause a problem with the washer.
6.
If connected to a sink faucet, turn on the hot water.
7.
Press the Start/Pause button to begin the cycle.
NOTE:
For best cleaning results, allow the wash cycle to complete. If you
need to interrupt the cycle, press the Power button to turn off the washer.
Then, run a Rinse & Spin cycle to ensure the bleach is completely removed.
The bleach must be thoroughly rinsed out of the washer before washing
clothes.

VACATIONING

1.
Unplug or disconnect power.
2.
Turn off both the cold water and hot water supply faucets. This will eliminate
the potential for damage to your home if a water hose ruptures or leaks.
3.
Dry the wash basket.
4.
Leave the lid open so that moisture inside the machine can evaporate and to
prevent the growth of mold or mildew.

MOVING OR STORAGE PREPARATION

IMPORTANT:
Do not store your washer in a cold environment where
temperatures fall below freezing. Water remaining in the washer will freeze and
cause damage to the washer. Store at room temperature.
In addition to performing the Vacationing steps, complete the following steps:
1.
Unplug or disconnect power.
2.
Disconnect the water hoses and the drain hose and place them into the wash
basket.
3.
Turn the leveling legs so that they are fully retracted into the washer cabinet.
Do not add detergent to the wash basket, and do not use
Do not clean the wash tub when clothes are in the washer.
29
Tabla de contenido

Solución de problemas

loading

Tabla de contenido