Kalor SLIM IDRO 16 Manual Del Usuario página 96

of the resistance. There should be no residual
combustion in the contact zone between the
edges of the crucible and the support surface on
the door crucible.
Brazier positioning
After removing and cleaning the brazier it is
important to reposition it in the correct position.
To facilitate this the brazier is equipped with a
tooth that must be perfectly stuck in the brazier
support. Only in this way the brazier is correctly
positioned and there will be no ignition or
combustion problems.
It is equally important to correctly position
the brazier's spoiler. It must obligatorily be
positioned as shown in the following picture. A
different positioning could prevent the pellets
from falling into the brazier.
96
The decreased or absent cleaning
can cause mis re and cause dam-
age to the thermostove and the
environment (possible emissions
of soot and unburned). Do not
pour the pellets may be present in
the brazier to mis re.