Kalor SLIM IDRO 16 Manual Del Usuario página 67

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 217
REMARKS:
- the appliance must be installed by a quali ed
technician in possession of the technical and
professional requirements according to the
DM37/2008 that, under its responsibility, to
ensure compliance with the rules of good
technique.
- the thermostove must be connected to
a heating system and/or to a network of
production of sanitary hot water, consistent with
its performance and its power
- you need to keep in mind all laws and national,
regional, provincial and municipal laws of the
country in which you installed the device
- check that the
oor is not
ammable: if
necessary use a suitable platform
- in the room where the generator must be
installed to heat must not pre-exist or be installed
with an extractor hood or ventilation ducts of the
collective type.
Should these devices be located in adjacent
rooms communicating with the installation, and
'prohibited the simultaneous use of the heat
generator, where there is a risk that one of the
two rooms being placed in depression than the
other
- it is not permissible to install in bedrooms or
bathrooms
- for hydraulic connections (see next chapter) it
is advisable to use where possible of hoses
67
Tabla de contenido
loading

Productos relacionados para Kalor SLIM IDRO 16

Tabla de contenido