Parkside PFDS 120 A2 Instrucciones De Uso página 12

Safety notes
the ground terminal to the hou-
sing of the welding unit! Never
connect the ground terminal to
any earthed parts that are far
away from the workpiece, such
as a water pipe in a different
corner of the room. This may
cause damage to the protective
ground system of the room in
which you are welding.
Do not use the welding unit in
„
rain.
Only put down the welding
„
unit in a level location.
The output is calculated for
„
an ambiance temperature of
20 °C. The welding time may
be reduced at higher tempera-
tures.
Danger from
electrical shock:
Electrical shock from a welding
electrode may be fatal. Never
weld in rain or snow. Wear dry
insulating gloves. Never touch
the electrode with your unprotec-
ted hand. Never wear any wet or
damaged gloves. Protect yourself
from electric shock by insulation
against the workpiece. Do not
open the device's housing.
Danger from welding
smoke:
Inhaling welding smoke may en-
12 GB/IE/NI/CY/MT
danger health. Do not hold your
head into the smoke. Use facili-
ties in open areas. Use the vent
to discharge the smoke.
Danger from welding sparks:
Welding sparks may cause ex-
plosion or fire. Keep flammable
substances away when welding.
Do not weld next to flammable
substances. Welding sparks may
cause fires. Keep a fire extingui-
sher at hand and an observer
who can use it at once nearby.
Do not weld on drums or any
closed containers.
Dangers from arc welding:
Arc welding may damage the
eyes and injure the skin. Wear
hat and goggles. Wear hearing
protection and a high shirt collar.
Wear welding protection helmet
and use the proper filter size.
Wear complete body protection.
Danger from electromagne-
tic fields:
Welding current produces electro-
magnetic fields. Never use toge-
ther with medical implants. Never
wind the welding lines around
your body. Combine welding
lines.