Intended Use; Li­ion Battery Display; Items Supplied - Hilti SF 10W-A22 Manual Del Usuario

All manuals and user guides at all-guides.com
3 Description
3.1 Overview of the product
Side handle
@
Keyless chuck
;
Torque and drilling mode selector ring
=
Gear selector switch
%
Forward/reverse selector switch with safety
&
lock
Control switch (with electronic speed
(
control)

3.2 Intended use

The product described is a hand-held cordless drill / driver. It is designed to be used for driving and removing
screws and for drilling in steel, wood and plastic.
▶ Use only Hilti Li­ion batteries of the B 22 series with this product.
▶ Use only Hilti battery chargers from the C4/36 series for charging these batteries.
3.3 ATC
The power tool is equipped with the ATC (Active Torque Control) quick-acting electronic cut-out.
If the accessory tool sticks or stalls, the power tool will suddenly pivot about its own axis in the opposite
direction. ATC detects this sudden pivoting movement of the power tool and switches the tool off immediately.
Note
For ATC to function correctly, the power tool must be free to pivot.
After the power tool has cut out due to ATC, switch it back on again by releasing the control switch
for a moment and then pressing the switch again.
3.4 Li­ion battery display
The charge status of the Li-ion battery and malfunctions of the power tool are indicated by the display on
the Li­ion battery. The charge status of the Li­ion battery is displayed after pressing one of the two battery
release buttons.
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks, the power tool is ready for use.
1 LED blinks, the power tool is not ready for use.
4 LEDs blink, the power tool is not ready for use.
Note
Battery charge status cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch.
If the battery display LEDs blink, please observe the instructions given in the Troubleshooting section.

3.5 Items supplied

Drill / driver, side handle, operating instructions.
Note
Spare parts, consumables and accessories approved by Hilti for use with the product can be found at
your local Hilti Center or online at: www.hilti.com
16
1
)
+
§
/
:
∙
Meaning
•
•
•
•
•
•
•
Grip
Light to illuminate the work area
Belt hook (optional)
Li­ion battery
Battery release button
Charge status and fault display (Li-ion
battery)
Charge status: 75 % to 100 %
Charge status: 50 % to 75 %
Charge status: 25 % to 50 %
Charge status: 10 % to 25 %
Charge status: < 10 %
The battery has overheated or is completely
discharged.
The power tool is overloaded or has overheated.