▶ Do not disassemble, crush or incinerate batteries and do not subject
them to temperatures over 80 °C (176 °F).
▶ Do not use or charge batteries that have suffered mechanical impact,
have been dropped from a height or show signs of damage. In this case,
always contact your Hilti Service.
▶ If the battery is too hot to touch it may be defective. Put the battery in
a place where it is clearly visible and where there is no risk of fire, at an
adequate distance from flammable materials. Allow the battery to cool
down. If it is still too hot to touch after an hour, the battery is faulty.
Contact Hilti Service.
3
Description
3.1 Product overview
Side handle
@
Keyless chuck
;
Function setting ring
=
Gear selector switch
%
Forward/reverse switch with
&
switch-on interlock
Control switch (with electronic
(
speed control)
3.2 Intended use
The product described is a hand-held cordless drill/driver. It is designed for
driving and removing screws and for drilling in steel, wood and plastic.
Use only Hilti Li-ion batteries of the B18 / B22 series with this product.
▶
▶ Use only the Hilti battery chargers of the C4/36 series for these batteries.
3.3 Li-ion battery state of charge display
The charge state of the Li-ion battery and malfunctions of the power tool are
indicated by the display on the Liion battery. The charge state of the Liion
battery is displayed after pressing one of the two battery release buttons.
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks, the power tool is
ready for use.
1 LED blinks, the power tool is not
ready for use.
8
English
1
)
+
§
/
:
Meaning
State of charge: 75 % to 100 %
State of charge: 50 % to 75 %
State of charge: 25 % to 50 %
State of charge: 10 % to 25 %
State of charge: < 10 %
The battery has overheated or is
completely discharged.
Grip
Release buttons with addi-
tional function (state of charge
display activation)
Rating plate
Belt hook (optional)
State of charge and fault dis-
play (Li-ion battery)
2184702
*2184702*