Technical Data - Hilti SF 10W-A22 Manual Del Usuario

All manuals and user guides at all-guides.com

4 Technical data

4.1 Drill/driver
Rated voltage
Weight in accordance with EPTA procedure
01/2003
Speed
Torque range (15 settings)
Ø drill bit (softwood)
Ø drill bit (hardwood)
Ø drill bit (metal)
4.2 Noise information and vibration values determined in accordance with EN 60745
The sound pressure and vibration values given in these instructions have been measured in accordance with
a standardized test and may be used to compare one electric tool with another. They may be used for a
preliminary assessment of exposure.
The data given represents the main applications of the electric tool. However, if the electric tool is used for
different applications, with different accessory tools, or is poorly maintained, the data may vary. This may
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually being used for a job. This may significantly reduce exposure over
the total working period.
Prescribe additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise emission values determined in accordance with EN 60745
Emission sound pressure level (L
Uncertainty for the sound pressure level (K
Sound (power) level (L
Uncertainty for the sound power level (K
Total vibration (vector sum of three directions), measured in accordance with EN 60745
Vibration emission value for screwdriving (a
Uncertainty for screwdriving (K)
Drilling in metal (a )
h,D
Uncertainty for drilling in metal (K)
5 Operation
5.1 Inserting the battery
CAUTION
Risk of injury. The drill/driver may start inadvertently.
▶ Before fitting the battery, check that the drill/driver is switched off and that the switch safety lock
is activated.
1st gear
2nd gear
3rd gear
4th gear
)
pA
)
pA
)
WA
)
WA
)
h
2
21.6 V
2.7 kg
0 rpm ... 310 rpm
0 rpm ... 530 rpm
0 rpm ... 1,210 rpm
0 rpm ... 2,100 rpm
2 Nm ... 12 Nm
1.5 mm ... 50 mm
1.5 mm ... 20 mm
1.5 mm ... 13 mm
SF 10W-A22
75 dB(A)
3 dB(A)
86 dB(A)
3 dB(A)
SF 10W-A22
< 2.5 m/s²
1.5 m/s²
< 2.5 m/s²
1.5 m/s²
17