Exergen TemporalScanner TAT-5000 Manual De Instrucciones página 3

Instructions for TAT5000-RS232
Instruction for use of TAT5000-RS232 with GE Corometrics Maternal/Fetal Monitor (selected
models only. Consult your GE Corometrics Maternal/Fetal Monitor User Manual.)
The TAT-5000-RS232 is permanently attached to the adapter cable with the RJ11 modular plug,
via a Dsub connection. The adapter cable should not be removed under any circumstance. Do not touch the patient
and the Dsub connector simultaneously.
1. Connect the RJ11 modular plug into the back of the Corometrics monitor (Consult your GE Corometrics
Maternal/Fetal Monitor User Manual to determine which modular jack to use).
2. Use the TAT-5000 as described in the TAT-5000 Reference Manual. The temperature information
will be sent to the monitor automatically and appear on the printout (provided the printing function is
enabled). The temperature will also appear on the display of the monitor. Consult your GE
Corometrics Maternal/Fetal monitor for proper software setup.
3. Error messages (HI, LO, HI A, LO A, bAtt and Err) that appear on the TAT-5000 LED display will
not appear on the Corometrics monitor.
4. Note: The RJ-11 connector is not for connection to a phone!
Product Map of the Exergen
Temporal Scanner TAT-5000
Battery Compartment
Battery Compartment Door
Compartment Door Screw
Probe Cone
Probe Lens
ON Button
Automatic turn-off in
30 seconds (when
measuring in body
temperature range,
otherwise 5 seconds)
LED Display Screen
9-volt battery
9-Volt Battery
3
F/C Switch
RJ11 Modular Plug