Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Operation
Connections
In order to access the charger's web application and
its information and settings, the end device and the
charger must be connected in the domestic network
(via WiFi or PLC connection). The Internet connection
of the domestic network enables you to use all the
functions of the web application.
If there is no domestic network available at the place
of use, your end device (PC, tablet or smartphone)
can be used to log in directly to the charger via its
WiFi hotspot. However with this there is no Internet
connection and only the locally installed functions are
available.
Information
When the end device is in a home network, it can no
longer access the web application via the IP address
of the hotspot (192.168.0.1), but instead only via the
automatically generated IP address or the host name
of the charger.
−
Existing IP address entries:
Web Application: Service e Device infor-
−
mation
e Networks e Net-
−
Charger: Settings
work information
−
Existing host name entries:
−
Letter containing access data
Web Application: Service e Device infor-
−
mation
28
Information
If during the setup process, the system switches
from hotspot mode to a WiFi network connection and
back again, a new login is required.
A change to the home network with Powerline Com-
munication is possible without a restart where there
is an existing hotspot connection.
Information
In the web application, the hotspot connection
should only be deactivated if a connection to a do-
mestic network is possible.
e
Select the desired network connection (hotspot,
WiFi, Powerline Communication).
Hotspot
Your end device can connect directly to the charger
using its integrated WiFi hotspot.
1. Select the function Set up hotspot.
2. In the settings, enter the network name and the
security code of the hotspot.
e
For information on establishing a hotspot con-
nection,.
WiFi
Information
If the charger is already connected to the end device
via a hotspot, a connection to the WiFi network can-
not be established simultaneously. The hotspot must
be deactivated first.
1. Activate WiFi.
2. Select the option Connect to network.
3. Select the corresponding network from the list
and enter the Security key. Different network:
Select when the network should be invisible.
4. Select that the IP address should be automati-
cally assigned (recommended).
�� The IP address appears as soon as the con-
nection to the network is established.
In the list, the network status is displayed as
Connected.
Managing WiFi networks
Option
Explanation
e
Different network
Select when your
network is an invis-
ible network.
e
Manage known net-
Select Delete to
works
remove the saved
networks. The
charger is thereby
always in the rele-
vant network.
Disconnecting the network connection
1. Select the network to which a connection exists.
2. Select Disconnect to disconnect the connection
to the WiFi network.
Configuring the network connection
1. Select the network to which a connection exists.
2. Select Configure to change the settings for the
IPv4 address and the DNS server.
Capítulos
Tabla de contenido
