Operation; Operating Instructions; Charging; Charging Process - Porsche PWCCU192 Serie Manual Del Usuario

Operation

Operation

Operating instructions

In some countries, the relevant authorities must be
notified when you connect electric vehicle charging
equipment.
e
Check obligation to notify the authorities and le-
gal requirements for operation before connecting
charging equipment.
NOTICE
Damage to the charger
e
Only operate the Wall Charger Connect when it
is mounted on the wall.
e
Do not immerse or submerge the charger in wa-
ter.
e
Protect the charger from snow and ice.
e
Handle the charger with care and protect it from
potential damage due to being driven over, drop-
ped, pulled, bent or crushed.
e
The Wall Charger Connect housing may only be
opened for installation by an electrician.
NOTICE
Damage to the charger
24
The charger must only be operated within a tem-
perature range from -22 °F to +122 °F (-30 °C to
+50 °C).
e
To prevent overheating during operation, avoid
continuous exposure of the charger to direct
sunlight. If the charger overheats, charging will
be interrupted automatically until the tempera-
ture has returned to the normal range.
e
If the charger is too hot or too cold, let it return
slowly to the operating temperature range and
do not actively cool it down or heat it, e.g. by
cooling it down with cold water or heating it with
a hairdryer.

Charging

Notes on charging
Vehicle charge port
For information on connecting and disconnecting the
vehicle cable to and from the vehicle charge port and
for the charging and connection status at the vehicle
charge port:
g See Owner's Manual.
Electric shock, fire
DANGER
Risk of serious or fatal injury due to fire or electric
shock.
e
Always observe the specified sequence for the

charging process.

e
Do not disconnect the vehicle cable from the
vehicle charge port during the charging process.
e
End the charging process before disconnecting
the vehicle cable from the vehicle charge port.
Errors are shown on the display and are indicated by
red status LEDs. Error message, cause and remedial
measure are displayed.
g Refer to chapter "Malfunctions" on page 34.

Charging times

The charging duration can vary depending on the
following factors:
–
Electrical socket used (domestic electrical outlet
or industrial electrical outlet)
– Country-specific power grid voltage and current
– Settings for limiting the charging current on the
charger
– Fluctuations in the grid voltage