Porsche PWCCU192 Serie Manual Del Usuario página 37

The following overview contains recommendations for dealing with malfunctions that restrict or prevent the vehicle from charging.
Situation
The display (screen, status LEDs, Power button) has stopped working com-
pletely.
The display is blank, the status LEDs do not change color and the Power button
lights up red.
Restricted operation or charging not possible (message on display).
The charging current is too low (message on display).
The grid voltage is too high (message on display).
The charger is not within the permitted temperature range (message on display).
The circuit breaker in the domestic installation was triggered (message on dis-
play).
Recommended action
e
Disconnect the charger from the power grid and check the fuse.
e
Have the domestic installation checked by a qualified electrician.
e
If the error persists, have the charger replaced.
e
The charger is overheated. Disconnect the charger from the power grid and
let it cool down slowly by itself.
e
If the error persists, have the charger replaced.
e
Make sure that the charger is within the permitted temperature range.
g Refer to chapter "Technical Data" on page 38.
e
Acknowledge any error message that appears.
e
Start the charger again. Press the Power button for at least 10 seconds to
start the charger again.
e
The home network is overloaded. Switch off other high-usage electrical
loads.
e
Have the domestic installation checked by a qualified electrician.
e
Device temperature switch-off: Avoid direct sunlight and let the charger cool
down slowly by itself.
e
Low-temperature switch-off: Let the charger heat up in a warm environment
before using it.
e
Device temperature sensor faulty: Have the charger replaced.
e
Reduce the charging current in the settings on the charger.
e
Acknowledge any error message that appears.
Malfunctions
35