F.Bertazzoni F45 CONXT Manual De Mantenimiento E Instalación página 10

3172533-000 english-1st IT.qxd:-
4 Then lift the door and release the hinges
from the front slots on the oven by pulling
outwards.
H
Warning
Do not remove the safety pins at any time, as
the hinge is taut and may cause injuries. Also,
it might not be possible to assemble the door
if these pins are not in place.
To assemble the door, hold it with both hands
and insert the hinges in the appropriate slots
at the front of the oven. Open the oven door
slowly and completely.
Cleaning the Large Interior
Glass Door
Do not use metal scouring pads, wire brushes
or commercial or abrasive powders to clean
the oven door. They may scratch the surface
and cause the glass to break.
Dismantling / Assembly Instructions for the
interior glass
1 Open the oven door.
2 Pull the glass upwards from the bottom (A).
10
16/3/12
H
A
08:06 Página 10
3 The interior glass is now free. Remove it.
Warning
Be careful: the oven door closes when the
interior glass is removed.
4 Clean the interior glass and the inside of
the oven door.
5 Then insert the supports on the interior glass
into the grooves at the top of the door (B).
B
6 Lower the glass into the door (C).
7 The glass is fixed to the door by pressing the
two lower supports (D) while pushing the glass
into the door (E).
D
Changing the oven bulb
Caution
To change the bulb, first ensure that the oven
is disconnected from the power supply.
• Ease out the chrome supports, releasing
them from the bolt (E).
C
E