Sound Volume Adjustment; Operation; File Library - DENTSPLY x-smart plus Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

6.5.7. Sound Volume Adjustment

The sound volume can be adjusted to 3 different levels: high, low and limited off (the sound
appears with a low level at the time of confirmation and error, but it does not sound during
reverse rotation, nor when reaching the torque limit value.
1. Press the sound volume (12) key (see Fig. 1).
2. The sound volume and the volume mark on the LCD panel change.
NOTES
The last sound volume is retained, even if the power is turned off.
• If "reset to default parameters" is carried out,
6.6.

Operation

6.6.1. File Library

The device contains a file library with the following preset NiTi systems:
A. Continuous rotary systems
• Gates
• PathFile
• Protaper
• Program (individual programs)
B. Reciprocating systems
• WaveOne
• RECIPROC
The manufacturer reserves the right to update the file library and the systems contained in it.
WARNINGS
• Follow the file manufacturer's instructions for use of endodontic files.
• The file system shown on the display must always match the file in use. This is of the
utmost importance in order to avoid misusing reciprocating files and continuous rotary files.
• Torque and speed values are subject to change by the file manufacturers without notice.
Therefore, the preset values in the library must be checked prior to use. Torque values
shown on the display are accurate and reliable only with X-SMART
properly maintained and lubricated.
FISDR-JAP / F1902124.X / 00 / 2011 – created 07/2011
Universal
®
®
the sound is set to the high level.
Plus 6:1 contra-angle
- 22 / 208 -
Tabla de contenido
loading

Tabla de contenido