Rear Child Seat For Bicycle Carrier Mounting System; Technical Features; Table Of Contents Of Product; Assembly Instructions - Polisport Bubbly Maxi + Manual Del Usuario

EN
REAR CHILD SEAT FOR BICYCLE
CARRIER MOUNTING SYSTEM
For child safety and for your peace of mind, Polisport has developed the
perfect child carrying solution that' s suitable for a wide range of adult bicycles.
Our ergonomic child seats are all built with safety and comfort as the
primary goals.
In this manual you will find the information to attach the baby seat to
the carrier.
Carefully read the manual for a safe and correct installation of the child
bicycle seat.

TECHNICAL FEATURES

• This child bicycle seat must not be mounted to bicycles fitted with rear
shock absorbers.
• This child bicycle seat must not be mounted to a racing bicycle with
drop handlebar.
• This child bicycle seat must not be mounted to Motorized Vehicles such
as Mopeds and Scooters.
• The child bicycle seat must be assembled on a carrier with a load capacity
of 25kg, according to the ISO 11243 standard.
• The maximum weight applied to the carrier cannot exceed 25kg.
• For safety reasons this seat shall only be fitted to luggage carriers in
accordance with ISO 11243 - 120 to 175 mm. Note: This seat also fits wider
carriers – 185 mm.
• The child bicycle seat must be assembled on bicycles with wheels with
diameters of 26" and 28".
• This child bicycle seat is only suitable for carrying children with a
maximum weight of 22 Kg (and children with recommended ages ranging
from 9 months to 5 years of age - with the weight as the decisive variable).
• The total weight of the cyclist and the child transported must not exceed
the maximum permitted load permitted for the bicycle. Information on
the maximum load can be found in the operating instructions of the
bicycle. You can also contact the manufacturer for this question.
• The seat may only be mounted on a bicycle suitable for the attachment
of such additional loads.
• The position of the child bicycle seat must be adjusted so that the bicycle
rider does not touch the child bicycle seat with the feet when in motion.
• It's very important to adjust correctly the seat and its component parts
for optimum comfort and safety of the child. It's also important that the
seat does not slope forwards, so that the child does not tend to slide out of
it. It's also important that the backrest slope backwards slightly.
• Check if all parts of the bicycle function correctly with the child bicycle
seat mounted.
• Check the instructions of the bicycle, and If you have any doubts
on fitting the child bicycle seat to your bicycle, please contact your
bicycle supplier for further information.

TABLE OF CONTENTS OF PRODUCT

A. Main seat
B/B.A. Safety belt
B1/B.A1. Safety lock
B2. Belt adjuster
B3. Central belt adjuster
B4. Safety buckle releases
B5. Safety buckle socket
C. Safety belt for bicycle frame
D. Footrest strap

ASSEMBLY INSTRUCTIONS

1. Unscrew the hand knob (G1) and simultaneously lift the red security
ring (G2). Open the jaw (G3) to an aperture wider than the luggage carrier.
4
| | www.polisport.com
E. Footrest
F. Centre of Gravity
G. Mounting plate to luggage
carrier
G1. Hand knob
G2. Safety red ring
G3. Jaw
H. Cushion
I. Batch serial number
2. Place the seat on the luggage carrier and then fasten the hand knob
(G1) so that the seat remains slightly attached to the luggage carrier.
Check if the jaw (G3) is properly fastened to the luggage carrier.
3. Fasten the hand knob (G1) so that the seat is well attached to the
luggage carrier. As soon as the hand knob is well tightened, make sure the
security lever is properly held as shown in the picture.
4. The child seat has a centre of gravity (F) (inscribed on the child seat) that
must be positioned in front of the rear wheel axle. If it is positioned behind
the axle, the distance must not exceed 10 cm. If the centre of gravity is
more than this distance from the axle, adjust the seat to the correct
position. Special care must also be taken when positioning the child seat
to ensure that the cyclist does not touch the child seat with his feet when
cycling. Make sure that the mounting plate (G) is firmly attached to the
carrier before proceeding. This step is extremely important for child and
cyclist safety. Check the safety of the fasteners regularly.
Note: In Germany, according to the German Traffic Law StVZO, bicycle
seats may only be fixed so that 2/3 of the seat depth or the Gravity Center
of the seat is located between the front and rear axle of the bicycle..
5. Pass the safety belt (C) around the bicycle frame. Adjust it as shown
in the picture, under tension. Make sure that remain loosen belt is not in
contact with the wheel. This step is extremely important for the child's
safety.
6. (B) To place the child in the seat, first open the belt. Start by pressing
the releases on the sides of the safety buckle (B4) and pull the buckle
(B1) upwards, so that it slides out of the socket (B5). Place the child in
the seat. Insert the safety buckle (B1) in its socket again (B5). Make sure
that the buckle socket (B5) is correctly positioned and does not hurt the
child. Next adjust the belt to the size of the child to ensure that the child is
firmly secured. First adjust the height of the belt. To do this, pull the straps
according to the size of the child. Before starting the journey, always check
that the child is secured and that the belt is snug but not so tight that it
hurts the child. We recommend that the child's helmet be put on after
the belt is adjusted.
Note: Always use the restraint system.
(B.A) To place the child in the seat, first fully extend the belt straps (B),
sliding the adjusters (B2). This makes it easier to put the helmet when the
child is in the seat. Do the same for the other side. To put the child in the
seat, open the lock (B1) of the safety belt (B) pressing the three buttons of
the lock (B1) as indicated. Before starting your ride, make sure the seat belt
is properly adjusted and that it does not hurt the child. This adjustment is
made by sliding the belt adjustors (B2).
Note: Always use the restraint system.
7. To adjust the height of the footrest (E) to fit your child, release the
footrest (E) from the seat (A) by pressing the two fasteners together and
lift the footrest as indicated in the picture (it may be necessary to apply
some pressure to the fasteners).
8. To reattach the foot rests, first engage the top pin, and push the footrest
(E) down to lock the clips into the slots holes.
9. To guarantee your child's safety, adjust the strap (D) of the footrest.
Unlock the strap (D) and adjust it to the child's foot. Lock it again making
sure the strap does not hurt the child.
10. Make sure you have followed and fulfilled all the instructions given.
When done so, the child bicycle seat is ready for use. IT IS MANDATORY
TO READ the following chapter on safety instructions about using your
child bicycle seat.

HOW TO REMOVE YOUR CHILD BICYCLE SEAT

Detach the safety-belt (C) in order to remove the child seat. To remove
the seat from the luggage carrier, unfasten the hand knob (G1) and lift
simultaneously the red security ring (G2) in order to open the jaw (G3)
wider than the width of the luggage carrier.
INSTRUCTION FOR USE
• The rider must be at least 16 years of age; Check legislation and national
regulations pertaining to this.