Cointra Cosmos Instrucciones De Instalación página 81

From the Wifi network menu, you can touch the Mode key to return to the Wifi menu. If no key is
touched for 30 seconds, the emitter will return to the last operating mode.
1 - DISCONNECT/CONNECT
• Once linked to a Wifi network, the DISCONNECT option will appear at the beginning.
• By touching the OK key, the physical disconnection of the linked Wifi network will be carried
out and it will end up like this:
- The option that will then appear as selectable will be CONNECT.
- The network connection symbol at the bottom will change its state to crossed out:
2 - UNLINK WIFI
It consists of unlinking the Wifi network to which we had previously managed to link through the
Application. It can be interesting if we want to leave a "free" emitter without a Wifi network, to later
switch to another Wifi network, or if there has been an error with the linked Wifi network.
Note: To link a new Wifi network (or re-link the same) it is not necessary to unlink it first.
When choosing Unlink Wifi with the OK key, the query screen "UNLINK WIFI
NETWORK?" will appear with two options, which can be selected with p and q,
as shown in the image on the right:
- If you want to exit the screen without accepting the action, with the OK key
on the CANCEL option, you will return to the Wifi Network menu.
- If the action is accepted, by touching the OK key in the OK option, the word
"UNLINKED" will appear on the screen, confirming the disconnection and
forgetting of the WiFi network that the emitter had, and it will take us to the
Wifi Menu. The Wifi Network menu will disappear within the Wifi menu.
- If no key is touched for 30 seconds, the emitter will return to the last oper-
ating mode.
The Wifi Network information will appear at the bottom of the screen:
• Network Connection symbol:
- Connected
- Disconnected
One or other symbol will appear, depending on the status you selected in the first option (initially
Connected, after being linked to a Wifi network).
A73023080
81
EN