Configuration Menu; Brightness Level At Rest - Cointra Cosmos Instrucciones De Instalación

It starts at the Type of Meter to reset, showing the DAILY, but you can also select any of the other
three available WEEKLY / MONTHLY / TOTAL.
If the OK key is touched while the Type of Meter to Reset is selected, you can choose with p and
q which one you want to reset. To confirm that it is correct, you must touch OK again.
- If the OK key is touched while the OK option is selected, it will reset the selected type of
meter, as well as the meters with a period less than the selected one.
When the meter or meters are reset, all their energy consumption values
will be "reset to 0":
Registered Period:
Consumed Energy:
Estimated Cost:
"DONE" will appear on the screen, confirming the meter reset.
- Touching the OK key with CANCEL selected, will return to the Energy menu.
In this Reset menu, touching the Mode key will automatically return to the Energy menu. If no key
is touched for 30 seconds, the emitter will return to the last operating mode.
5.4.6

CONFIGURATION Menu

Configuration menu allows the user to set parameters and func-
tions for the other modes.
There are 9 menus in Configuration menu which can be se-
lected by q and p keys, and touching the OK key when the
desired menu is highlighted.
When finished, the Mode key can be touched to return to the previous mode. When no keys are
touched for 30 seconds, the emitter will return to the previous operation mode.

5.4.6.1 Brightness level at rest

This menu sets the level of brightness that the emitter will show when it is at rest; this is the bright-
ness level of the screen kept after the time selected in menu 2.
There are 4 levels to choose from:
0: Off
2: 65 % brightness
The level can be adjusted using the p and q keys and confirmed with the OK key; the emitter will
then return to the Configuration screen.
90
EN
0 days / 0 hours
0 kWh
0 €
1: 25 % brightness
3: 100 % brightness
(this is the level when any key is touched)
A73023080