Key Board - Sony XAV-65 Manual Del Usuario

3-6.

KEY BOARD

Note 1: When the complete KEY board is replaced, refer
to "FLICKER ADJUSTMENT" on page 18.
6 screw
(B2 8)
4 LCD flexible board
(LCD601)
A
B
8 KEY board
Note 4: KEY board has been changed from the midway
of production. When replacing KEY board,
please refer to "DISTINGUISHING BETWEEN
THE FORMER AND NEW TYPES OF THE
COMPLETE KEY BOARD, GUIDE ASSY,
AND FRONT PANEL ASSY" on page 5 (Except
Saudi Arabia model).
7 claw
5 two screws
(K M2 3.5)
7 two claws
A
6 screw
B
(B2 8)
2 connector
6 screw
(B2 8)
Note 2: When installing the flexible board, insert straight to the connector.
No slanting after insertion.
OK
Insert is straight to the interior.
connector
flexible board
7 two claws
3 touch panel flexible board
(CON602)
(CON701)
Wire setting
Note 3: When installing the connector, please
KEY board
E712
NG
Insert is incline
connector
flexible board
5 screw
(K M2 3.5)
1 VOL knob assy
5 screw
(K M2 3.5)
– Front panel block rear view
install them correctly.
There is a possibility that this machine
damages when not correctly installing it.
OK NG
Insert is straight
Insert is shallow
to the interior.
XAV-65
Ver. 1.1
–
17