Front Panel Block - Sony XAV-65 Manual Del Usuario

3-3.

FRONT PANEL BLOCK

Sheet (KEY protection) setting
Note 2: Arrange the touch panel flexible
board as shown in the figure
below before installing the sheet
(KEY protection).
– Right view –
KEY board
touch panel flexible board
4 sheet (KEY protection)
1 two screws
(M2.6 5 B/F)
2 two claw
6 front panel block
Note 1: When installing the sheet (KEY protection),
paste the sheet (KEY protection) after aligned
with the edge of the hole.
Do not align with the silk print.
OK
The hole can be seen.
NG
Aligned with the silk print.
2 claw
KEY board
5 flexible flat cable
(CON702)
3 Remove the front panel block
2 claw
in the direction of an arrow.
1 screw
(M2.6 5 B/F)
2 claw
1 screw
(M2.6 5 B/F)
XAV-65
Note 3: When installing the flexible
flat cable, insert straight to
the connector.
No slanting after insertion.
OK
Insert is straight to the interior.
NG
Insert is incline
15