Porsche Home Energy Manager 9Y0.915.686 Manual De Instalación página 28

Installation and connection
Push-on connector for relay contact
DE
Parameter
EN
Push-on connector
FR
Manufacturer
IT
Socket part number
ES
Connector part number
PT
Overview of J900/J901 connectors
NL
SV
FI
DA
NO
EL
CZ
HU
PL
HR
Fig. 13: Overview of J900/J901
SR
1 Pin 1
SK
SL
Push-on Pin Signal
connector
ET
J900 1 NO contact
LT
2 COM contact
LV
3 NC contact
J901 1 NO contact
RO
2 COM contact
BG
3 NC contact
MK
26
Push-on connector for communication
Value Parameter
J900/J901 Push-on connector
Phoenix Contact Manufacturer
1757255 Socket part number
1754571 Connector part number
Overview of J1000 connectors
Fig. 14: Overview of J1000
1 Pin 1
2 Pin 2
Push-on
connector
Value
J1000
J1000
Phoenix Contact
1786840
1790111
Connecting current and voltage measurement
Information
The software 08/2019 does not allow for connection
to RS485/CAN. For future features, please pay
attention to information on new software releases.
The current and voltage measurement channels
are connected via several connectors. The required
connector is included in the scope of delivery of the
energy manager.
Connecting the WiFi antenna
The WiFi antenna is used to boost the WiFi signal.
1. Connect the WiFi antenna to the plug/screw
connection on the energy manager.
2. Secure the WiFi antenna outside the distribution
box using the magnetic base.
Pin Signal
1 RS485 signal B –
2 RS485 signal A +
3 Earth
4 Earth
5 CAN Low
6 CAN High