System Utility - Selecta UV 3100 Manual De Instrucciones

MANUAL DE INSTRUCCIONES CODIGO 80260 REV A
Fig. 4.17
Fig. 4.18
Fig. 4.19
J
.P. SELECTA s.a.u.
Feb/2017
•
Step 7, Print Data:
Press [PRINT] to print the result.
•
Step 8, Delete Data:
Press [CLEAR] to delete the data.
•
Step 9, Store the Data:
After measurement, press [SAVE] to store the result. Input the file name by the
numeric keypad, then press [ENTER] to confirm.
5.3.6 Multi Wavelength Mode
•
Step 1, Go into Multi Wavelength Measurement:
In the Main Menu, press [6] or
rement» and then press [ENTER] to go into multi wavelength measurement screen
(Fig. 4.18).
•
Step 2, Setup Wavelength:
Press F1 to go into wavelength setting screen, input all the wavelength value one
by one by the numeric keypad. Press [ENTER] to confirm, press [ESC] to return.
•
Step 3, Set Photometric Mode:
Press F2 to set the photometric mode, use
mode, press [ENTER] to confirm.
•
Step 4, Calibrate 100%T/0Abs:
Place the Reference Sample in the light path, press [100%T/0 ABS] to calibrate
100%T/0Abs.
•
Step 5, Measure Sample:
Place the sample to be tested in the light path, press [START/STOP] to measure,
the test result will be displayed in the data sheet (Fig. 4.19).
•
Step 6, Print Data:
Press [PRINT] to print the result.
•
Step 7, Delete Data:
Press [CLEAR] to delete the data.
•
Step 8, Store the Data:
After measurement, press [SAVE] to store the result. Input the file name by the
numeric keypad and press [ENTER] to confirm.

5.4 System Utility

In the main menu, press [7] or use
press [ENTER] to confirm (Fig. 4.20)
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
e-mail: [email protected] - website: http://www.jpselecta.es
(Sujetas a modificaciones sin previo aviso) Pag.: 47
& to choose «Multi Wavelength Measu-
& to select «Abs.» or «T%»
& to select «System Utility» and
Tel 34 93 770 08 77 Fax 34 93 770 23 62