Selecta UV 3100 Manual De Instrucciones página 43

MANUAL DE INSTRUCCIONES CODIGO 80260 REV A
Fig. 4.5
Fig. 4.6
Fig. 4.7
J
.P. SELECTA s.a.u.
Feb/2017
5) Calibrate Standard Samples. Put the corresponding standard samples in the
light path as the screen indicates and press [START/STOP] to measure. Then the
Abs. value would appear in the corresponding table (Fig. 4.5)
Load the Stored Curves
In the «Calibration Table» screen, press [OPEN] to go into files select screen. Use
&
Users can press F4
cancel.
•
Step 4, Return the Sample Measurement Screen:
In the «Calibration Table» screen, press [ESC] to return to the Quantitative Test
screen (Fig. 4.7).
•
Step 5, Calibrate 100%T/0Abs:
Put the Reference Sample in the light path, press [100%T/0 ABS] to calibrate
100%T/0Abs.
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
e-mail: [email protected] - website: http://www.jpselecta.es
(Sujetas a modificaciones sin previo aviso) Pag.: 43
to select the curve you need and press [ENTER] to load.
to see the curve (Fig. 4.6), and then press [ESC] to
Tel 34 93 770 08 77 Fax 34 93 770 23 62