Main Functions - Selecta UV 3100 Manual De Instrucciones

INSTRUCTION MANUAL CODE 80260 REV A
J
.P. SELECTA s.a.u.
Feb/2017

3.1 Main Functions

UV-3100 has 7 functions:
•
Photometry
This is the basic mode, the photometric mode can be switched between Absorbance
and Transmittance. You can use 2-points method to measure the concentration.
•
Quantitative
Two methods are included in the menu: Coefficient Method and Standard
Curve Method. The Regression Equation and the test result can be stored in the RAM
and be printed out.
•
Wavelength Scan
Scan range and scan intervals can be set (0.1nm, 0.2nm, 0.5nm, 1.0nm, 2.0nm,
5.0nm). The data and the curve can be stored and printed out.
•
Kinetics
The minimum sampling interval is 0.5 second. The data and the curve can be stored
and printed out.
•
DNA/Protein Test
Provide two methods. Customers can also set the parameters. The data can be
printed out.
•
Multi-wavelength Test
Users can set several wavelengths before test, then the system will test all the T or A
values of the setting wavelength one by one. The results can be printed out.
•
Utility
Users can set the favourable items to keep the instrument work under best conditions.
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
e-mail: [email protected] - website: http://www.jpselecta.es
(It can be modified without notice)
Tel 34 93 770 08 77 Fax 34 93 770 23 62
Page: 36