Introduction; Equipment; Technical Data - ESAB Mig 320 Origo Instrucciones De Uso

GB
3

INTRODUCTION

TM
The Origo Mig 320 is step switched power source designed for MIG/MAG--welding
together with wire feed units Origo
The power units are fan--cooled and equipped with thermal overload protection.
The machine is fitted with an instrument that displays current and voltage.
It incorporates a hold function and can be calibrated.
ESAB's accessories for the product can be found on page 37.
3.1

Equipment

The power source is supplied with:
Shelf for gas cylinder
S
Guide pin for wire feed unit
S
Instruction manual
S
4

TECHNICAL DATA

Voltage
Permissible load
at100 % duty cycle
at 60 % duty cycle
at 30 % duty cycle
Setting range (DC)
Open circuit voltage
Open circuit power
Efficiency at max current
Power factor at max current
Control voltage
Dimensions lxwxh
Weight
Operating temperature
Enclosure class
Application classification
Duty cycle
The duty cycle refers to the time as a percentage of a ten--minute period that you can weld at a cer-
tain load without overloading.
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked IP23 is designed for indoor and outdoor use.
Application class
The symbol indicates that the power source is designed for use in areas with increased
electrical hazard.
320e
TM
Feed 304 and the most of ESAB wire feeders.
TM
Origo Mig 320
230/400--415/500V 3∼ ∼ ∼ ∼ 50 Hz 230/440--460 3∼ ∼ ∼ ∼ 60Hz
195 A/24 V
250 A/27 V
320 A/30 V
40A/16V--320A/30V
16--40 V
200 W
75%
0,94
42 V, 50/60 Hz
840 x 425 x 830
111 kg
o
--10 to +40 C
IP 23
- - 6 - -