Introduction; Equipment; Technical Data - ESAB Caddy Mig C200i Manual De Instrucciones

GB
3

INTRODUCTION

Caddy Mig C200i is an inverter based, portable semiautomatic welder in a
R R R R
compact design, intended for MIG/MAG welding.
The possibility of welding with homogeneous wire/shielding gas and welding with
gasless tubular wire is obtained by switching the + and -- connections on the
switching terminal close to the wire feed unit.
The machine operates with wire diameters from
pure argon, mixed gas or pure CO
R
The Caddy Mig C200i draws current with near--unity power factor which produces
very low level harmonics in the mains.
ESAB's accessories for the product can be found on page 277.
3.1

Equipment

The power source is supplied with:
TM
Welding gun MXL
S
Return cable with clamp (3m, fixed)
S
Mains cable (3m, fixed, with plug)
S
Shoulder strap (see page 278)
S
Instruction manual
S
Gas hose with quick connection (4.5m)
S
4

TECHNICAL DATA

Voltage
Permissible load at
100% duty cycle
60 % duty cycle
25 % duty cycle
Setting range (DC)
Open circuit voltage
Open circuit power
Efficiency
Power factor
Wire feed speed
Wire diameter
Bobbin size
Dimensions lxwxh
Weight
Operating temperature
C200ie
may be used.
2
180 (3m, fixed)
Fe
CW
Ss
Al
- - 59 - -
0,6 to 1,0 mm. As shielding gas
∅ ∅
230 V, 1∼ 50/60 Hz
100 A
120 A
180 A
30 - - 200 A
60 V
15 W
82%
0.99
2 -- 12m/min
∅0.6--1.0
∅0.8--1.0
∅0.8--1.0
∅1.0
∅200 mm
449x198x347
12 kg
o
--10 to +40 C