Installing The New Davey Lifeguard; Installation Of The Ecosalt2; The Acid Dosing Pump; Components Of The Acid Dosing Pump - Davey DPLGEU Instalación E Instrucciones De Funcionamiento

4. INSTALLING THE NEW DAVEY LIFEGUARD

4.1 INSTALLATION OF THE EcoSalt2

In order to operate, the Davey Lifeguard requires first, the installation of an EcoSalt2.
If this is yet to be fitted, please refer to the instructions supplied with the EcoSalt2. An
electronic copy of the full installation & operating instructions can be downloaded from
the following URL www.bit.ly/EcoSalt2, or by scanning this QR code.
IMPORTANT: If you are upgrading an already installed, existing EcoSalt 2 it is
important to connect your Lifeguard to WiFi after completing first time set-up so that
the EcoSalt2 can be receive a software update.

4.2 THE ACID DOSING PUMP

4.2.1. Components of the acid dosing pump

H
L K
J
I
G
A: Clear cover of acid dosing pump;
B: 24VDC power lead;
C: Acid feeder tube;
D: Mounting screw;
E: Wall plug for mounting screw;
F: Double sided tape for assisted wall mounting;
G: Mounting bracket;
H: Locating lugs for clear cover of acid dosing pump;
I: Suction filter
J: Suction feeder tube drum weight;
K: Squeeze tube locking nuts, for acid feeder tube;
L: Squeeze tube;
M: Squeeze tube roller; and
N: Acid injection point.
A
M
B
C
F E D
6
N
Figure 4.1