Using The App; Overriding/Ignoring Ph Probe; On The Davey Lifeguard Control Panel - Davey DPLGEU Instalación E Instrucciones De Funcionamiento

Figure 8.16
• Follow the instructions for pH calibration in the first time start-up section of this manual.

8.1.2.2. Using the app

Note: the pH cannot be calibrated via the app.

8.1.3. Overriding/ignoring pH probe

Should the need to arise whereby the pH probe needs to be isolated (turned off, or ignored) this
is possible both via the Lifeguard control panel, or via the Davey Lifeguard app. This may become
necessary if the probe is damaged during a maintenance clean. For cleaning instructions, see the
maintenance section of this manual.
8.1.3.1. On the Lifeguard control panel
• From the HOME SCREEN, press the
main menu (Figure 8.17);
Figure 8.17
• Press the
Figure 8.18
• Press the menu/setting select button. This will now show the settings menu (Figure 8.19);
settings:
ph set point
-> orp set point
language
menu/setting select button. This will now show the
main:
-> modes
settings
maintenance
menu up/down 3 times, scrolling down to settings (Figure 8.18);
main:
modes
-> settings
maintenance
34