Temp Probe Menu; Connecting Davey Lifeguard To Wifi - Davey DPLGEU Instalación E Instrucciones De Funcionamiento

• Place the salt probe into the TDS solution, press the
3000ppm, then press
• Carefully unscrew the bottom half of the bottle, from the bottle's lid (refer Figure 6.10). Do not attempt
to pull the whole bottle off the probe as you risk damaging the glass probe end;
• Follow the same process outlined for the pH probe see Figure 6.15-6.17

6.9 TEMP PROBE MENU

• The next screen asks if the temperature probe is currently connected and to be used (refer Figure
6.27). The temperature probe is the same probe as the salt probe, but it does plug into the Davey
Lifeguard controller by a separate socket;
Figure 6.27
• Use the menu up/down buttons to toggle between yes and no.
• Once correct, then press
• If you've chosen to use the temperature probe, use the
current temperature of the pool's water.

7. CONNECTING DAVEY LIFEGUARD TO WiFi

Connecting your Davey Lifeguard to WiFi means you can monitor and control your pool remotely via the
app and staying connected will mean you have access to the latest software updates for the device.
Before you connect to WiFi ensure you have a strong WiFi connection at the pool equipment area where
the Davey Lifeguard is installed. You may need to extend your WiFi signal by purchasing a WiFi repeater.
Make sure your WiFi is 2.4 GHz.
Should you wish to connect your Davey Lifeguard to WiFi, follow these steps, otherwise skip to the next
section. You can connect to WiFi at anytime.
• From the app store (or Apple Store), download the DAVEY LIFEGUARD app.
• Open App on phone/device
• Create an account
• Go to Davey Lifeguard and turn on Bluetooth on device and in Davey Lifeguard (using phone App)
• With phone connected to WiFi, connect Davey Lifeguard to the internet
• Once the app is on your device, load the app and watch the demo video on the first screen.
menu/setting select;
is temp probe
connected?
->yes
menu/setting select;
Davey
27
menu up/down buttons to scroll to show
menu up/down buttons to display the
Figure 7.1