Temperature Recall; Temperature Display - Toggle; Off Mode; Pulse Timer Mode - Covidien Genius 3 Manual De Instrucciones

8. The patient temperature and the probe cover eject icons will be displayed.
Note the "*" means non-ear mode.
9. Press the eject button to eject the probe cover into a proper waste container.
10. Return the unit to the base after use.

Temperature Recall

After a reading has been taken, the thermometer will enter "off" mode within about 10 seconds. The reading can be recalled with
the scan button or by pressing and holding the °C/°F button.
Temperature Display - Toggle °C or °F
While a reading is shown on the display, press and hold the °C/°F button to change between Celsius and Fahrenheit.

Off Mode

The thermometer will go into off mode after 30-40 seconds of non-use. To wake up the thermometer, install a new probe cover.
This off mode helps improve battery life.

Pulse Timer Mode

1. Press and hold the timer button to enter Timer mode. Press again to start the timer. The timer will run from 0 to 60 seconds.
2. The thermometer will beep once at 15 seconds, twice at 30 seconds, three times at 45 seconds, and four times at 60 seconds.
3. Pressing the timer button while the timer is displayed will return the thermometer to "off" mode.
4. At the end of the 60 seconds, the thermometer will wait two seconds and then enter sleep mode.
5. Return the thermometer to base for storage.
Tympanic Thermometer and Base
6
en
Table of Contents